Is your door acting rebellious and doing the opposite of what it’s supposed to? Is it not latching properly, risking your privacy? This is perhaps one of the most common problems people face, but the good thing is that there are multiple solutions for it. You can follow an easy DIY or call a professional door repair service to help ease your door troubles.
In this blog, we guide you on how you can perform a swift door repair in Rochester with some essential tools.
Get to the Root Cause of the Problem
Before trying to fix the problem, you should know where it lies. You’ll have to assess what’s causing the door to not close properly. For instance, it could be an issue with the strike plates not being aligned properly, which is causing latching issues.
If you’re having trouble figuring this out, you could contact professionals for door repair and let them handle everything with ease. This will prevent you from wasting time and ensure that you get your work done efficiently.
4 Ways to Fix a Door That Won’t Close
Let’s have a look at some of the easiest ways you can fix the door that won’t close:
1. Work on those Hinges
More often than not, it’s the hinges that are the cause of all the trouble. If your door isn’t closing, this should be the first thing you check and fix. All you need is a screwdriver to tighten up the nuts and bolts of the frame and door, and you’re good to go.
You can check the screw holes and assess whether they require a filling for sturdiness. Add toothpicks into the holes and secure with glue before you add in the screws.
2. Check Up on the Strike Plate
Next, you should check the strike plate and see whether it’s adequately aligned with the latch. Because of this, there’s a fair chance your door isn’t closing correctly. It’s a common occurrence and also relatively easy to fix.
You’ll need to adjust the strike plate and the latch to line up the right way. Grab a pair of screwdrivers, move the plate around to check where it falls perfectly in sync with the latch, and then tighten up the screws. This is easier in the case of old doors that only have a loose screw problem.
For new doors, you might want to consider a professional door repair company, considering that the measurements of the door would need adjustments.
3. Add Some Lubrication
Sometimes, the excessive friction of the nuts and bolts causes the door not to close correctly. All you have to do for this is grab a silicon-based lubricant and spray it on the hinges and the latch to make it seamless. There’s no rocket science here, just a plain old trick of lubrication that will keep things running.
4. Recheck for any Obstructions
Adding door sweeps is excellent for maintaining the indoor temperature, but you don’t want them to hinder your door’s functioning. Check if these are responsible for your door not closing properly. Many times, you’ll see some bits and pieces causing the blockage. The best thing for you to do is remove these pieces without having to take out the entire door sweep.
Also Read: How to Fix Common Door Issues?
Quick DIY to Fix Your Door
We’ve come up with a quick and easy DIY to help you get your door to close properly: adjust your strike plate.
Step 1: Get your supplies together. You’ll need epoxy putty, an old card, soapy water in a bowl, and a knife.
Step 2: Cut a small piece of epoxy and knead it with your fingers with the help of soapy water. (Make sure you do this within 5-6 minutes)
Step 3: Using your fingers, push the epoxy into the screw holes, and use the card to remove any excess.
Step 4: Let that sit for about 20 minutes, and then you can align the strike plate to screw it in.
Want to Fix a Door that Won’t Close Properly?
While DIYs are a great way to fix the problem of your door not closing properly, it can get complicated to figure out on your own sometimes too. Rochester Door Company can help you in your time of need.
Our expertise in door repair in Rochester can help alleviate these issues for you. Contact us today for a quote.
